Showing posts with label Ubuntu. Show all posts
Showing posts with label Ubuntu. Show all posts

Sunday, July 24, 2011

Setup Raid 1 Using mdadm In Ubuntu

Sorry for the prolonged absence. Been very busy. I recently bought two 2 Tb hard drives and used mdadm to create a Raid 1 array for my new data drives in Ubuntu 10.04
Raid 1 uses 2 identical size hard drives and will mirror the data from one hard drive to the other automatically.

I tried several tutorials to set up mdadm but several of them either missed a few steps or were lacking good instructions. But then I found this site and followed the instructions. Working fine now!

http://lummie.co.uk/ubuntu-server-setting-up-and-managing-raid1/

I can use the Gnome Disk Utility available in the repo's to check the SMART Status of each disk in the array as well as checking the health of the array.
I usually use Western Digital hard drives as they have been very reliable for me but for this project I used a set of Samsung's.

The Samsung's required a firmware fix to repair a flaw that caused lost data.
I had to create a Dos based bootable flash drive and throw the firmware on it then boot to it to flash the hard drive firmware. Talk about the retro 90's!

I have been running the array for a month and everything has been flawless.
Read and write speeds have been what I expected for a software based Raid array. And I have not had to rebuild the array except the one time I had an unexpected power outage when a tree took down a power line.

Software based Raid setups have their advantages and disadvantages.
Many of the motherboard based Raid controllers are actually considered fake Raid and don't work well with Linux. They also have disadvantages that surpass those of a software Raid.

One advantage of using software such as mdadm is the ability to use any model of Western Digital hard drives. I didn't know this fact until after I ordered the Samsung's.

A while back Western Digital pulled a fast one on it's customers. They decided they needed to increase their revenues on their higher cost 'Enterprise' models of hard drives. No one was buying them. Instead everyone was purchasing their Black edition and using them for their Raid setups.

So Western Digital went and disabled the TLER feature in all of their hard drives except for the Enterpise editions.
TLER is an abbreviation for Time Limited Error Recovery. Essentially a hardware Raid controller queries the hard drive every so often and the hard drive responds back. If the controller does not get a response in a predetermined time it marks the hard drive as bad and drops it from the array. This requires you to rebuild the array which takes quite awhile.

Since WD disabled TLER in their home based hard drives, the drive will continue to drop out of the array and require you to spend countless hours of adding the drive back into the array then rebuild it. Not very productive.

With mdadm it does not query the hard drive nor does it rely on TLER.
That means that it is up to you to be vigilant and check the status of the array on a regular basis. This can be done through the Gnome Disk Utility or a set of commands found on the page I linked to.

You can also reconfigure mdadm to send you email alerts if something happens to the array. I haven't set up my system this way so I don't know what is all involved.
You can find additional info on mdadm and advanced features here;

https://help.ubuntu.com/10.04/serverguide/C/advanced-installation.html

Remember that backing up your data is important. Using a Raid array in a Raid 1 or Raid 5 configuration is a step in the right direction but unless you monitor the array health you can have a disaster on your hands that rivals a single hard drive failure scenario.


Have fun and keep your data safe.

Monday, May 31, 2010

FFMPEG Missing Codec Error

Recently a reader asked me a question about a missing codec error while using ffmpeg to convert a video.
Here's the error message;
It seems your FFMPEG (libavcodec) installation lacks the following encoder:
MPEG AAC Audio.

I initially told him to make sure he has the AAC audio codec installed. Then I tried a conversion and got a similar message. I know I had everything installed so it was time to investigate.

Didn't take me long to find out that the ffmpeg including the unstripped version from the restricted repo's is lacking certain codecs due to licensing B.S.
So what do we do?
I read many articles talking about compiling your own ffmpeg with the missing codecs. Now I'm not against doing that but I was hoping for something easier. LOL!

Then I found this page;
http://ubuntuforums.org/showthread.php?t=1117283

It has a comprehensive tutorial on how to compile your own ffmpeg.
And it also contains a quick 2 copy and paste terminal commands that will download and install the unstripped ffmpeg.
Just make sure that you pick your correct version of Ubuntu when using either option.

Many thanks to FakeOutdoorsman for his excellent tutorial on fixing this.

Linux!
There are so many ways around the B.S!

Enjoy!

Wednesday, January 13, 2010

Hope for Intel Motherboards Using Ubuntu 10.4 ?

A friend of mine has some computers that have Intel motherboards and he also has a Toshiba laptop.
For the past several releases of Ubuntu, he has not been able to use or install Ubuntu on these computers. Either he got a boot error or had video problems.

But he contacted me recently and said he just tried the 10.4 Alpha release of Ubuntu. He was happy to report that both Intel based pc's and the Toshiba booted up and he was able to use them in Live mode.
His remarks were something to the effect that as long as they don't muck something up between now and the final release he will be able to update his pc's and laptop.

So let's keep our fingers crossed and hope the development team stays on track and gets some of these older bugs fixed and not introduce new ones or break something along the way. The final release is scheduled for sometime in April and that date is rapidly approaching. Especially when you have a whole OS to upgrade. My best regards to everyone who is associated with this project and keeping my fingers crossed that nothing that is working now isn't broken in the final release.

Until then I'll just play around with some 64 bit distros.

TaZMAn

Monday, July 20, 2009

Streamtuner Shoutcast Plugin Oddity

I have to really wonder if the continuing Shoutcast problem in Streamtuner is in fact caused by the Ubuntu kernel.
I ask this question out loud after installing Vector Linux which is based on Slackware using Linux Kernel version 2.6.27.12

After I installed Vector Linux on an older 1 Ghz computer I saw that Streamtuner was preinstalled. Curious as to whether it would work properly or not I fired it up.
To my surprise, not only did the Shoutcast tab work perfectly but Punkcast and basic.ch plugins were installed and working properly.

Now it is possible that the good people involved with Vector Linux may have patched the plugin or it may be the latest Streamtuner release works as it should in Vector while still causing problems in Ubuntu.

I've also read that other distros don't have problems with the Streamtuner Shoutcast plugin that was recently released.
Yet it seems most Ubuntu users are still having problems with it.

I plan to take a look at the Vector install and the plugin they are using in an attempt to put this to rest once and for all.
I like Streamtuner and have not found anything that compares to it. So I'm not going to give up the fight to get this fixed properly.

TaZ

Tuesday, January 27, 2009

Tabbed Nautilus In Ubuntu 8.10

Tabbed browsing in Nautilus is a dream come true.
While this may be old news for many readers it was recently 'discovered' by me in an accidental way.

But now I'm hooked. It's like tabbed Firefox and makes copying or moving files a breeze.
Open Documents then a new tab for Pictures.
Right click on a picture file in the Documents folder, tab over to the Pictures folder and paste!

And yes! Sometimes I'm a bit slow.
LOL!!

Enjoy!

TaZMAn

Wednesday, January 21, 2009

Add Custom Functionality To Nautilus

I came across this web page that explains how to add custom functionality to Nautilus.
By adding the Nautilus Action Package from Synaptic you can essentially create your own custom scripts that will show up in the right click menu.

It's not that hard to use and they provide a link to a web page filled with pre-made action scripts.

The page with a small tutorial and links to the pre-made scripts is at the link in the title or here;

Customize Nautilus

http://www.makeuseof.com/tag/add-custom-functionality-to-nautilus-linux/


Enjoy!

TaZMAn

Strange Happenings In Firefox

I use Firefox. I also use the password manager along with the password exporter plugin.
But the other night I was in a panic. I recently signed up at a few new sites and didn't export my newest password list.
And when I went to a site that I've been a member of for a long while my user name and password didn't appear!

And when I went to view my password list inside Firefox, it was empty!
Uh Oh! Now what?

So I take a look around Google and see there was a bug due to a problem with a Linux file. But that bug was a bit old and all was supposedly fixed.
I also came across some articles that mentioned what files stored the user names and passwords. The data would be encrypted but I figured that I could try a few things with them.

First, I could check the file sizes and verify if indeed they held my data or where actual zero byte toast.
Secondly, I figured I could save a copy elsewhere, reinstall Firefox then put these files back in place. This solution didn't thrill me because I felt that the encryption was based on an algorithm generated when Firefox was installed.
But I was willing to give it a try since I did have the key file.

So I copied the files to a new location, saved off my bookmarks and was ready to uninstall Firefox. But something told me to try a reboot first.
So I rebooted the computer and sure enough, my user names and passwords returned. I immediately exported the list just in case it happened again.

And it did! The following evening I had it happen again. Funny thing about all this. Both times it happened was at the same forum. Both times I went to log in at the same forum and both times I temporarily lost my user name and password list. Hasn't happened since but I now make sure to export my password list every time I sign up at a new site.

And if you are wondering about the reputation of the forum and possible games by the owner. Uh-Uh! Not there. It is one of the strictest forums I have ever been a member of.
Don't even think of asking how to recover your lost Windows password or anything else like that. Not allowed.

And in case you were wondering about those 2 files?
Open you home folder and view hidden files.
Now look for the .mozilla/firefox folder.
Open the abcxyz.default folder were abcxyz will be some mix of letters and numbers created when you installed Firefox.

Now look for the key3.db file. This is the encryption file.
Now grab the signons3.txt file. This contains your user names and passwords.

Enjoy!

TaZMAn

60 Best Ubuntu Themes

60 Ubuntu Themes!
While some of us may argue that these are the 60 best themes, one thing you can't argue about.
They are all displayed on one page and can be downloaded from the included link below each screenshot.

If you want some new themes then this may be just what you are looking for.

60 Themes
http://www.anewmorning.com/2008/12/29/60-best-ubuntu-themes/

Enjoy!

TaZMAn

Thursday, January 15, 2009

Games For Linux and Other PC's

Everyone enjoys games. Some more then others and then there are the hardcore gamers. And it seems that the lack of games is what is holding Linux back.
Can't say what category these games will fall into but they are all worth a look no matter what your gaming status is.
In this article I will provide you with 3 web sites and include a brief overview of each.

First on the list is the Spring Engine project.
Spring Project
http://spring.clan-sy.com/

Spring is a project aiming to create a new and versatile RTS Engine.
It is available for Linux and Windows as well as OSX however the OSX version is still in rough form.
For the Linux platform they have source code as well as packages for Ubuntu and several other popular distros.

They also have mods for their engine though many of them are still in development. All in all it is worth the trip to their site to check it out.
It is also a web site to keep an eye on for future developments. They seem to be a very ambitious crew and if they get enough interest and help we may see some very interesting and entertaining games coming out of there for years to come.


Next on the list is more of a game mod web site then a game site. But you have to ask yourself "Aren't all games just a mod of an older game?" Well, kind of. LOL!!

Moddb.com
http://www.moddb.com/platforms/set/Linux

The above link should take you the Linux section.
There you will see the newest articles and below it a list of games and mods.
As with the above Spring Engine web site, many of the releases are still in testing but most should be released in the next few weeks.

One game I downloaded and tested was called Smokin' Guns. A recreation of the old Wild West, I was first given the job to protect the bank from robbers and later on I became a bank robber.
Considering the lower end specs of my computer, this game played fairly well and the graphics were pretty good. And all I had to do was make sure Wine was installed because the launcher is a Dos executible file. Click on it and the game begins. No install needed. Nice game and portable! What more could you ask for?

So go to Moddb and take a look around. Besides games they have plenty of mods for other games including a few that I saw for Crysis. HUH!?? LOL!


Finally we are going to turn back the clocks to the days of Dos.
The days when games were simple and prices were cheaper. (GRIN!)

DosBox
http://www.dosbox.com

Earlier today I was checking it out but unfortunately it is offline right now. Hopefully it's a maintenance issue.
DosBox allows you to play your old Dos games on your computer. It's available for as source code for independent platforms and Linux, Windows installer and a Mac version as well.

The website has a complete database of Dos games that lets you see if and how well your game will play in DosBox. While Dos games aren't bleeding edge there are many of the older titles that have a type of cult status and can still be enjoyed today. That is if you haven't tossed all those old floppies.
Speaking of floppies.... Hope you have floppy drive in your computer so you can load all those games into DosBox.


So there you go. Games are available for Linux and it looks as if many more will be emerging in the next few weeks and months. They may not be titles like Crysis or COD4, but many have good game play and are based on either the older and highly regarded Quake / Doom engines or the new Spring engine.

Now go and play some games!
And remeber.........Enjoy!

TaZMAn

Linux Will Never Beat Out Windows

You read the right! Linux will never beat out Windows.
But before you start throwing rotten vegetables or shoes at me, read on.

I was chatting with a friend the other night telling him that I was looking for a different Linux distro to try out. Would probably dual boot it and if it worked well and grabbed my attention it may become my main distro of choice.
I told him that Ubuntu was boring.

So I went into my 60 gig stash of Linux iso's and grabbed a few that I felt may suit my needs. Burned them to disks and began my journey.
Tried Mandriva, Sabayon, Wolvix, Mepis and a few others.
Nothing! Had that same feeling that I have with Ubuntu.

What's going on? Why this sudden boredom?
I sat in front of the TV for awhile, my mind bouncing back and forth between the show and why I felt the way I did about Ubuntu.
After about an hour, I realized why I felt this way.

For all the years I had used Windows I was always hands on. Doing updates, checking security, firewall settings and logs, running antivirus and spyware scans, defragging the hard drive and a whole host of other tasks that became the normal routine with using Windows.

Now that I am using Ubuntu, I no longer have this routine. All I have to do is turn on the computer, log in and do what I intended to do when I first sat down in front of the computer.
Oh I check the firewall and tripwire logs once in a while but they always display the usual traffic or change log notes.
I don't have to update my antivirus or do scans. The only time I scan a file is if I'm sending it to a Windows user.

So now I know why I got that bored feeling. I no longer have to be a hands on 'stuck in a routine' computer user. Ubuntu and Linux as a whole takes care of all that for me. Check disk happens every 25 or so log ins. The hard drive doesn't need defragging. I no longer need to clean up the registry because I uninstalled 1 or 2 software titles.

I guess if you want to say that all the things you need to do in Windows to keep it safe and functional could be called exciting then using Linux could be called boring.

And that is why Linux will never beat Windows. Linux doesn't have that 'excitement' factor. Instead it offers me a secure and stable computer that has done everything I have asked it to do.
I have done graphics, video editing, dvd production, cateloguing my mp3 library, surf the internet, email and much more.

The only difference now is that my productivity has increased as I no longer need to spend time making sure everything is safe and updated.
Yep! Linux will never beat Windows in this way and I'm glad that I am finally bored.

Guess I'll stick with Ubuntu for a while longer! :-)

Enjoy!

TaZMAn

Wednesday, January 7, 2009

Backup Your Gnome Settings With yourgnome

yourgnome is a small easy to use script that lets you backup and restore your Gnome settings quickly. Note that it does not backup the actual installed software, rather the Gnome settings that took so painstakingly long to tweak.

Used in conjunction with the software list backup script found elsewhere on my blog, you can quickly restore a new install to the way you previously had it.

Some of the items that yourgnome backsup are as follows;
All your themes, backgrounds you use settings, gnome-panel settings, bluetooth-manager settings, evolution settings, file-roller settings, gnome-screensaver settings, gnome-session settings, gnome-terminal settings, gnome-volume-control settings, metacity & compiz settings, update-manager & notifier settings, totem settings, network configuration set by Gnome, screenlets and much more!

It processes all the settings then creates a tar.gz package that you can tuck safely away until you need it for yourgnome to restore the settings.

You can check out and download yourgnome from the developers page found here;
yourgnome
http://code.google.com/p/yourgnome/

Again, I must thank Rok for telling me about this great script.

Enjoy!

TaZMAn

Saturday, December 27, 2008

A Whois Tutorial Using Network Tools. Amazing!

The Whois tool is part of the Network tools found in Ubuntu and is readily available for all other operating systems.
It is also the feature tool of the following mini tutorial. I enjoy networking and network security. It's a hobby of mine. :-)

Many people don't realize how much info can be gleaned by using Whois. I hope to open the door and provide some education on the use of these tools.
The Network Tools feature is found in the System-Administration section of the Ubuntu menu.
Let's open it up and click on the Whois tab.

For this tutorial I will be using a page I found during a Google search of Windows anti-virus reviews.
I have numerous Windows customers and like to keep on top of the ever changing technology.

One of the first pages that came up in my search was a site titled 2009 Security Software Reviews.
The page had reviews for numerous anti-virus software. Many of the reviewed anti-virus software were easily recognizable but a few weren't.
And a few of the more notables were missing but I was after any info I could find and started reading the reviews.
Now the fun begins!

When using Whois you don't use the http or the www portion of the address. All you need is the website's name and the domain extension like .com, .net, .org, etc.
So let's put the following address in Whois and click the Whois button;
2009securitysoftwarereviews.com


A few seconds later Whois provides the following info;

Registrant:
Star Advertising
P.O. Box 8044
Delray Beach, Florida 33484
United States

Registered through: GoDaddy.com, Inc.
Created on: 25-Feb-08
Expires on: 25-Feb-10
Last Updated on: 03-Mar-08

Administrative Contact:
Frischman, Arthur arthur@frischman.com
Star Advertising, Inc.
150 West 25th Street
Suite 904
New York, New York 10001
United States
(561) 251-7198 Fax --

Technical Contact:
Frischman, Arthur arthur@frischman.com
Star Advertising, Inc.
150 West 25th Street
Suite 904
New York, New York 10001
United States
(561) 251-7198 Fax --

Domain servers in listed order:
NS1.RACKMY.COM
NS2.RACKMY.COM


Hmmmm....... We see that the contact info is Arthur Frischman at arthur@frischman.com
You want to make a note of that for later.
We also see that this review site is owned by Star Advertising.

Let's copy the above info and paste it into a text document for future reference.
Now let's take a look at the website of the #1 rated security software.
It can be found and purchased here;
pcsecurityshield.com

Clear out the Domain Address search window of Whois and insert the following address in Whois and click the button;
pcsecurityshield.com


A Whois search provides us with this info;

Registrant:
PCSecurityShield
601 N Congress Avenue
Suite 303
Delray Beach, Florida 33445
United States

Registered through: GoDaddy.com, Inc.
Domain Name: PCSECURITYSHIELD.COM
Created on: 04-Dec-03
Expires on: 04-Dec-11
Last Updated on: 28-Aug-06

Administrative Contact:
Frischman, Arthur arthur@pcsecurityshield.com
PCSecurityShield
601 N Congress Avenue
Suite 303
Delray Beach, Florida 33445
United States
5612433247 Fax -- 5612433249

Technical Contact:
Frischman, Arthur arthur@pcsecurityshield.com
PCSecurityShield
601 N Congress Avenue
Suite 303
Delray Beach, Florida 33445
United States
5612433247 Fax -- 5612433249

Domain servers in listed order:
NS1.RACKMY.COM
NS2.RACKMY.COM


Again we see that the contact info is Arthur Frischman at arthur@frischman.com
We also see that the street addresses are different but the city and state are the same.
They use different email address domains but both use arthur@.
They both use the same domain servers.
Isn't that interesting?!!!!

Now let's dig a bit deeper and use the resources found at;
http://www.robtex.com/dns

Doing a search of frischman.com gave me this page;
http://www.robtex.com/dns/www.frischman.com.html

I'll let you the reader make a decision and draw your own conclusions from the above info.
As you can see, using the Whois tool can provide some good info which allows you to investigate
website and domain info.
Never take claims on the internet at face value. Do a little research before making a decision.
It only takes you a few minutes and can provide you with good hard facts.

The foregoing shows how and why the use of domain proxies has become more prevalent.
A proxy allows the registrant of a domain name to hide all contact and address info from a search.
The implications and consequences of such secrecy should be obvious to the reader.
However, in an upcoming article I will show you more ways of finding who owns a domain name.
I will also continue my mini-series tutorials of the Domain Tools included with Ubuntu.


Be safe!

TaZMAn


Thursday, December 11, 2008

Kernel Update Breaks VirtualBox

This morning I get a call from a customer that runs Ubuntu and XP in VirtualBox.
They said that when the tried starting VirtualBox they received an error message about the wrong driver version. They also mentioned that they recently had a kernel update.

Drat! It's pouring rain and they are almost an hour away with traffic. I really don't want to make the trip. So I get all the info from them about the error message and tell them I'll call them back in 5 minutes.

I do a quick search and find the problem and the solution.
Luckily it is a simple terminal command and takes a few minutes to run it.
I call them back, walk them through the fix and in less then 5 minutes they are back up and very happy.

Seems there is a bug in VirtualBox that causes it to not recompile the driver for the new kernel. So when you get a new kernel update, VirtualBox breaks because the driver has been compiled for the older kernel version.
Sun really needs to fix this bug and it may have been fixed by now. I believe my customer has the VirtualBox updates turned off which means they are using an older version.

So if you are usinfg VirtualBox and get a driver error after you had a kernel update here is how you fix it.

Open the terminal.
Now copy and paste or type in the following code;

sudo /etc/init.d/vboxdrv setup

The setup will begin to recomplie the drivers to match the kernel version.
It takes a few minutes and when it's down you will see your command pompt reappear.

That's it. A simple fix that takes a few minutes.
Hope it saves someone a hassle like it saved me.

Enjoy!

Check Your Hard Drive Smart Status Using A GUI

Checking your hard drives Smart status is preventive damage control.
It lets you see if your hard drive is slowly failing or is healthy.
But in Linux the standard smartmon tools can be a bit of a hassle to set up and interpret the results.

I have my smartmon tools set to do a Smart scan once a day and send the results to a log file.
That means remembering to open the log file and read it. Something I neglect to do on a regular basis. Also setting up the smartmon tools in the command line may be a bit over the top for the new user. Many new users are terrified of the terminal and don't want to be bothered wading through log files.
I needed something that allowed me to check the Smart status on demand and provide the results in 'Real' time with a Graphical User Interface (GUI).

GSmartControl (GSC) fills all those needs plus adds a few other features.
Each time you open GSC it does a check of the hard drives installed in your system.
You can view the capabilities of each hard drive, attributes, error log and self test log.
It also has 2 test modes that allow you to run a diagnostic test on the hard drive to make sure it is good.

GSC can be downloaded from it's home page found here;
GSmartControl Website

http://gsmartcontrol.berlios.de/home/index.php/en/Home

They have packages for all the popular Linux distros and an exe installer for Windows users although they will need to install GTK+ first.

As Linux matures we will find more software that provides the user with a GUI.
Some purists may not be happy with the proliferation of GUI's and tend to snub them as the GUI is not true Linux but the mainstream user wants or even demands a GUI.

Now go and grab this nice utility and know that you can now easily check your hard drive for possible problems.

Enjoy!

Wednesday, December 3, 2008

Enable VirtualBox USB Support In Ubuntu 8.10 Ibex

I just got around to installing VirtualBox in my newly installed Ibex system.
Finished the install and noticed a warning message that there were no USB ports present or supported.

I know from past experience that to have USB access in VirtualBox that you need the PUEL version from their website and not the OSE version from the repositories.

So I do some searching and found some info that fixed the USB problem and is a very easy fix. It should work for all Ibex users and hopefully this problem will be fixed in future versions.

First make sure you have added your user to the list of VirtualBox users group. To do this just copy and paste the following into your terminal;

$ sudo gpasswd -a YOURUSERNAME vboxusers

Where YOURUSERNAME is your user name.

Now let's add some USB support to VirtualBox. Open the fstab file so you can edit it. Since it needs root permissions we can do it through the terminal with this command;

sudo gedit /etc/fstab

Now that the fstab file is open add the following command to the bottom of the fstab file;

none /proc/bus/usb usbfs devgid=46,devmode=664 0 0

Close the file making sure to save it.
Now reboot your computer and when you open VirtualBox you will have USB support.

Simple enough?

Enjoy!

TaZMAn




Sunday, November 30, 2008

New Video Converting And Audio Ripping Tool With GUI

A new tool called WinFF does a great job of converting videos and ripping audio from videos. It is available in .deb packages, exe for Windows, RPM's for Red Hat and source code for other OS's.

Since I updated to Ibex and have the newest VLC, I have encountered a serious problem when converting videos. That problem being that I have no audio.
My previous tutorial on how to convert videos is now confined to VLC version 0.8.6

I'm not really sure whether the audio problem is with VLC or with the ffmpeg codec. There are many posts saying that due to patent conflicts, ffmeg no longer supports ac3 or mp3 audio streams. I can't verify that info at this time.
My feeling is that the problem is a bug in VLC.
WinFF however solves this problem, makes it much easier to convert a video, offers many more formats and rips audio with a few clicks.

The GUI is intuitive. It's only a matter of choosing what video you want to convert, what format you want it in and where to save it.
And the list of presets is extensive. It offers the user a choice that will suit almost every need.

The presets are as follows;
Audio formats include Mp3, m4a, Ac3, Wav and WMA
AVI including MS compatible, Xvid 4:3 and 16:9
Creative Zen in Xvid 4:3 and 16:9
DV in Raw DV 4:3 and 16:9
DVD that includes almost every format in Pal and NTSC
iPod formats in Xvid and H.264
Mobile Phones in the 3g2 and Blackberry formats
Mp4 uses the H.264 format
Other presets include formats in the Palm, PSP, Quicktime, Rockbox, VCD, FLV and WMV

As you can see, this provides you with plenty of options.
And it also rips and converts audio!!
Of course you will need all the extra codecs to access all the features.
Ubuntu users can get those codecs from Medibuntu.
Windows users can check out the packages at Free-Codecs.

Where do I get it from?
I'll give you some links that you can check out and download it from.

The creator's blog can be found here;
BiggMatt
Stop by and post a thanks for this handy tool.

Deb packages can be downloaded from this page;
WinFF .deb Downloads

Click on the arrow next to winff-0.43 to expand it then select the .deb package for either the !386 or the AMD64 depending what platform you are using.


The download page for OS's other then Ubuntu or .deb packages can be found here;
Winff Non-Deb

This is where you will find the exe, rpm and source packages.


I am very impressed with this tool and want to thank BiggMatt for all his hard work in providing the community with a very handy tool.

Enjoy!

TaZMAn



Friday, November 28, 2008

My Ubuntu File System Became Corrupted

The other day I was doing a few things on my Ubuntu system and decided to do a reboot.
On restart my system would hang on boot up.
So I rebooted and hit the ESC key to get access to the grub menu. I figured I'd try to try the recovery mode.

Well it wouldn't boot and reported a file system error. I told it to fix it. It tried but came back with a corrupt file system error.
OH SHEETZ!!
Remebering back to my Windows days this can be a 2 day job until I get all the updates and software installed.
Fortunately, this isn't the case with Linux.

I was running Gutsy and had planned to upgrade to Ibex as I have been reading and receiving positive reports about it.
But I wasn't really ready to do it yet. I hadn't set up a seperate Home partiton when I installed Gutsy so my first task was to retrieve and back that folder up.

I grabbed my trusty Knoppix DVD and booted it up to a Live session.
I like Knoppix because it is easy to change Read/Write permissions on a hard drive or partition and provides you with a ton of applications should you need them.

Once I was up and running in Knoppix I began the task of moving about 40 gigs of data from my Home folder to a different partition on my hard drive.
The whole process took about 2 hours. Not really that long and it may have been less as I didn't time it but I do know it was not more then 2 hours.

Now that my data was safe I grabbed my Cd of Ibex which I had burned a few weeks ago in anticipation of upgrading.
The new partitioner is nicer looking and provides more info and options about the hard drives and partitions.
It was set to Automatic and wanted to resize the original partiton that contained Gutsy. Since that file system was corrupt and I didn't want Gutsy I clicked on the Manual Partitioning setting.

I told the partitioner not to touch my other hard drive or partitions.
Then I set up a partition for Home, Root and Swap.
Got through the rest of the screens and clicked Install.

The Cd spun up and it was about 15 minutes later I get a message that the install is finished!
I pop out the Cd and reboot. It boots back up and I'm looking at the new desktop.

First things first. I go and grab the updates. All 170 megs of them. Also grab the Nvidia restricted driver.
Then I install Thunderbird and configure it. I move my email inbox and addy book from my backed up Thunderbird.
Kill my network connection and open Thunderbird to make sure everything is there. It is!
So I reconnect my network and get my email.

Next I install a few Firefox addons and import my passwords and bookmarks.
Then I install Flash and a few other plugins.
Go to Medibuntu and add in their repository to my list.
Now I open Synaptic and procede to grab all the software and goodies I usually use.
Finally I move my Nautilus scripts from the backed up folder to the new script folder.

Total time for install of Ubuntu until I finished moving the scripts was 2 1/2 hours!!
A whole lot better the the day or two I would have spent restoring a Windows machine.
There are several reasons as to why it takes much less time with Linux.
2 of the major reasons are as follows;

1) When you download and install the updates you only have to reboot once after they are all installed. This is due to the kernel update and the installation of the Nvidia driver.

2) All the software I needed was available from a single source list. I didn't need to look all over the internet for the software packages. Also, I didn't need to reboot after every software install.

There are a few things I have previously done that helped my restore my system.
One is that I use the Password Import/Export addon for Firefox and export my password file everytime I acquire a new password.
Secondly is that I export my bookmarks on a regular basis although this is not really needed as Firefox regularly backs up your bookmarks to a sub-folder within the Firefox folder.

And as to the $1,000,000 question as to what caused my file system to become corrupt?
I searched the log files I had from the Gutsy system.
I'm using a Desktop system but my cpu is a mobile processor.
I had been playing with the hibernate and suspend features.

According to the log files, hibernate had failed 2 times in the past few times I had used it.
When hibernate is implemented, all the open data is stored to Ram.
Because hibernate failed to properly implement, I believe the data in the Ram became corrupted and was written back to the hard drive in it's corrupted form.
This caused damage to the file system which recovery could not repair.

So now I am up to date with Ibex. Have everything back up to where I previously had been and didn't loose one bit of my personal data.
And it was all finished within 1/2 a day!
And now that I have my Home on a seperate partition, I won't have to worry about crashes like this one again.

The key is not to panic and have a clear cut plan of action as to backing up your data and reinstall procedures.

Good to be back!

TaZMAn

Sunday, November 23, 2008

Create A Slide Show Video From Your Pictures

Update!
Manslide has a new name. It is now called Smile.

The Smile .deb package can be downloaded from here;
Smile .deb Package Download

There is also a good Smile How-to in the forums found here;
Smile How-To

While essentially the same as Manslide, it adds a few new features and a new GUI but also removed one or two transition effects from the menu.
I also had it lock up on me once. I imagine that since they redesigned it, they still have a few bugs to iron out.
The older Manslide package does not work properly in Ibex due to window display conflicts. The rest of the older article below is still useful for the newer Smile software.
Smile will add a menu entry in the Graphics section.


Manslide is a program that will take your pictures, create a slide show from them and export it to a mpg video file using the mpgv codec.
It has a very easy to use graphical interface.

You select the pictures you want to include in the slideshow.
Then you set the amount of time you want the picture to be displayed.
It even has an effects package that gives you several transitional effects for the picture's entry onto the screen.
Finally it also includes the ability to add an audio track.

This software will be very useful for the photographer who wants to make a video disk to show others their pictures.
Use it to make a presentation video or a recreation of your vacation.
Take the mpeg video it creates and convert it to a DVD format then burn it. Now you have a universal media for play on any DVD player.

There doesn't seem to be an official home page for this project right now but I did find this page that seems to have the most updated info;

Manslide at GetDeb
http://www.getdeb.net/app/ManSlide

Ubuntu users can get this software through the Synaptic Package Manager.
Do a search for manslide and select the manslide package and the manslide-effects for the transition effects used in Manslide.

I know a former Windows user that tried making a video slide show in Windows that didn't turn out very well. I'm sure this package will work much better for him. :-)

Enjoy!

TaZMAn

Update Multiple Computers With a Cd Or DVD

Apt On Cd is handy utility that I had used during the Dapper and Feisty days.
As you update your computer, the packages you download are stored in the /var/cache/apt/archives
folder. They stay there as a sort of backup and if you reinstall a package.
This helps keep the strain off the repository server.

Apt On Cd takes advantage of the stored packages and creates an Iso file with configuration files that you can burn to a Cd or DVD then place it in another Ubuntu computer that needs updating.
Think of it as a portable repository.

This utility is perfect for multi computer users that have a slow internet connection or no connection at all on the other computers. It also makes updating the other computers faster as you no longer have to re-download the updates then install them.

Apt On Cd is available through the repositories. Open Synaptic Package Manager and do a search for aptoncd
Or you can get it from their website found here;
AptOnCD
http://aptoncd.sourceforge.net/

Windows Users Read This;

If you have a Windows system, I won't let you out of the loop.
There's a software app that grabs all the updates from the Microsoft server and creates an exe file that allows you to run it on other Windows computers of the same distro. It also lets you choose during the update process which updates you want to install.
And it has add-on products like Flash and Shockwave plus many tweaks.
You can get more info about it here;

AutoPatcher
http://www.autopatcher.com/

Enjoy!

TaZMAn

Spice Up Your Desktop With This CPU Monitor

Hot Babe will spice up your desktop while also showing your CPU usage.
Although CPU usage may not be on your mind at the time! LOL!!

Download packages are available for numerous distros or as source code.
There is even a package ported for Windows users.












As your CPU usage goes up, the clothing comes off. Makes you want to peg out your CPU. LOL!!

You can get it in Ubuntu from the Synaptic Package Manager by doing a search for hot-babe.
During the install you will get a disclaimer requiring you to consent to the install due to the mature theme.

Other distros can download the packages from their website found here;
Hot Babe
http://www.dindinx.net/hotbabe/index.php

Thanks to Rok for his suggestion to blog this.

And stay tuned for more desktop fun like penguins on your desktop or putting holes in your windows and task bar just for fun!

Enjoy!

TaZMAn